Description
This Fibaro Z-Wave Single Switch Controller requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.
The Fibaro Z-Wave Single Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers.
RF Protocol | Z‐Wave |
RF Frequency | 921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
Z‐Wave device type | Z-Wave Switch, Routing Slave |
| Power | 110-230V ± 10% 50/60 Hz |
Operation Range | Up to 15m indoors with no obstacles |
Application | Indoor use only, up to 2.5kW resistive load, 10A |
Operation temperature | 0 ~ 55 °C |
Storage temperature | ‐10 ~ 80 °C |
Weight | 50g |
Housing | ABS |
Compliance | EN 55015, EN 60669-2-1 |
Regulatory Compliance Mark | N5496 |
Dimensions | (LxWxH) 42mm x 37mm x 17mm |
