Description
The FIBARO Z-Wave RGBW Controller also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors, wind sensors, pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could, for example, set your RGB garden lights to turn red and flicker when one of your security sensors is triggered, alerting your neighbours to the intruder and allowing them to notify the proper authorities.
This device has four output channels which means that you can connect and independently control up to four light sources. The FIBARO Z-Wave RGBW Controller also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills.
The FIBARO Z-Wave RGBW Controller can control:
- 12 / 24V DC powered RGB strips
- 12 / 24V DC powered RGBW strips
- 12 / 24V DC powered LED strips, bulbs, etc
- 12 / 24V DC powered halogen lights
- 12 / 24V DC powered low output power fans
This product integrates with all Australian certified (921.42 MHz) Z-Wave controllers.
RF Protocol | Z‐Wave |
RF Frequency | 921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
Z‐Wave device type | Z-Wave dimmer |
Power | 12V and 24V |
Operation Range | Up to 50m outdoors, up to 30m indoors (depending on terrain and building structure) |
Application | Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller |
Operation temperature | 0 ~ 55 °C |
Storage temperature | ‐10 ~ 80 °C |
Weight | 50g |
Housing | ABS |
Compliance | EN 55015, EN 60669-2-1 |
Regulatory Compliance Mark | N5496 |
