Showing all 16 results

Add to cart

FIBARO Z-Wave Flood Sensor

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range.

Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

HomeSYS Home Automation | DHS Active Infrared Sensor
Add to cart

DHS Active Infrared Sensor

The Active Infrared Sensor is part of sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensors to be a part of Z-Wave ecosystem.

It can be great safety option for the garage door automation. Ideal for nursing care of the elderly, monitoring of children’s movements, monitor doorways, windows, deterring and warning of unwanted intruders etc.

Please note: 12V Power supply is required.

Add to cart

PHILIO Z-Wave Smoke Sensor

The PHILIO Smoke Sensor is a battery operated Z-Wave Plus ionisation smoke detector. Smoke detection is signaled through siren and LED diode. Additionally, the smoke sensor signal can be sent via Z-Wave gateway to authorised user’s smartphones or tablets. The PHILIO  Smoke Sensor is designed to be placed on a ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Beeping signal warns when the battery needs replacing.

Add to cart

VISION Z-Wave Tilt Sensor

The VISION Z-Wave Garage Door Tilt Sensor is designed for use with any object whose operation results in a change of vertical/horizontal orientation. Possible uses include:

  • Attached to a panel/tilt garage door to detect when it is opened and closed
  • Attached to a letter box door to send an alert when mail is delivered
  • Attached to the back of a home theatre chair to dim the lights when reclined
  • Attached to the boot of a car to trigger an event when it is opened or closed
  • Attached to a tilt style window frame to trigger an alarm if opened by an intruder
Add to cart

FAKRO Rain Sensor

When you’re away from home, the FAKRO ZRD Rain Sensor is the perfect solution for dealing with unpredictable weather changes. When the ZRD Rain Sensor detects rainfall, it will automatically close any motorised windows situated around the home. The ZRD Rain Sensor can work in conjunction with many window installation types, including skylights, awnings and much more. By having every aspect of the home regularly monitored, the system can immediately react to changes in weather.

Select options

FIBARO Door / Window Sensor

The FIBARO Z-Wave D/W Sensor is a small, battery powered magnetic door and window sensor.

  • Easy to use and install
  • Completely wireless
  • Automatic software updates
  • Comes in multiple (seven) colours
  • Tamper and low battery alarm notification
Add to cart

FIBARO Z-Wave Multi Sensor

The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

 

Features:

  • Compatible with any Z-Wave controller.
  • Detects motion using a passive IR sensor.
  • Measures the temperature.
  • Measures the light intensity.
  • Easy installation on a wall or any surface.
  • Protected against tampering and theft – once vibrations are detected, the notification is sent to the main controller.
  • Alarms of movement and temperature are signaled by LED diode blinking.
  • Simple earthquake detector mode.

 

HomeSYS Home Automation | Aeotec Z Wave Water Sensor 6
Add to cart

AEOTEC Z-WAVE WATER SENSOR 6

Water Sensor 6. Your home’s 6th sense.

We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.

Water Sensor 6 doesn’t just monitor for when a pipe has burst or is leaking, it can take protective measures to help limit the amount of damage caused.

Using the power of Z-Wave you can put Water Sensor 6 in control of other Z-Wave devices so that, when the worst occurs, Water Sensor 6 do anything from sending alerts to turning off electricity and water valves in order to protect your home and your loved ones.

Water Sensor 6 is a:

  • Water Sensor
  • Tilt Sensor
  • Vibration Sensor
  • Temperature Sensor
  • Safety Sensor – programmed to take action when needed, by Auto-closing water valves, Turning on sump pumps, and Auto turning off power

 

Add to cart

AEOTEC Z-WAVE RECESSED DOOR SENSOR GEN5

Recessed Door Sensor is a simple idea. It tells you and your Z-Wave network if a door is open or closed. Simple but powerful, Recessed Door Sensor enables you to create a whole new level of control through Z-Wave. Alarms. Safety. Intelligence. Automated decisions. All enabled by one simple, powerful and invisible device.

 

Simple to install.
The beauty of an invisible installation is complemented by the beauty of a simple installation. Installing Recessed Door Sensor is easy. Adding it to your home’s network takes no more than activating its battery and syncing it with your Z-Wave system. Making the whole thing invisible means little more than a slight drill hole hidden away on the top of your door. It’s the sort of installation that takes no more than 10 minutes but provides years’ worth of benefits.

 

 

Add to cart

AEOTEC Z-WAVE MULTI-SENSOR 6 – RECESSOR TRIM

MultiSensor 6 is smartest and most subtle Z-Wave sensor available. Within its impossibly small design it features 6 different Z-Wave sensors, effortlessly monitoring a room and making your connected home all the more intelligent.

With this Recessor Trim, the impossibly small MultiSensor 6 becomes even smaller. In fact, it becomes nearly invisible, sitting only 1mm within a room.

12mm of sensor: We like things small. We prefer them invisible. Recessor offers the best of both. It lets MultiSensor 6 monitor 6 different points of intelligence in a room, and it lets it do it without reducing its accuracy or functionality.

Self-holding: Itself only 44mm deep, Recessor snaps in place courtesy of 2 ingenious retaining spring clips. Those same springs of course allow for Recessor and MultiSensor 6 to be removed at any time without damaging your ceiling or wall.

Ceiling installation: Monitor a full room with MultiSensor 6 using Recessor to install it within your ceiling.

Wall installation: Use MultiSensor 6 as a beam sensor by installing it within a wall cavity using Recessor.

Tiltable: Once recessed, your MultiSensor 6 can be angled up to 30º within Recessor, fine tuning its measurements and readings to be just where you need them.

Cut-out: 75mm

Add to cart

AEOTEC Z-WAVE MULTI-SENSOR 6

This Z-Wave MultiSensor 6 is a 6-in-1 Sensor, giving you maximum functionality for your home automation.

Creating an object designed to secure and manage your home takes precision. It also takes subtlety. MultiSensor 6 is perfectly small. Its beautifully tapered, 42 mm body allows it to be used anywhere within the home, but its design and styling hasn’t been crafted simply to be attractive. A squared based allows MultiSensor 6 to offer a battery life of over 2 years, the best of any Z-Wave motion sensor. MultiSensor 6 has been designed with rounded edges to be more than beautiful; it’s been designed so that its presence in a room is never obvious. Subtle is smart.

 

The MultiSensor 6 delivers the following functions:

  • Motion Sensor
  • Temperature Sensor
  • Light Sensor
  • Humidity Sensor
  • Vibration Sensor
  • UV Sensor

 

 

HomeSYS Home Automation | Aeotec Z Wave Door Window Sensor 6
Add to cart

AEOTEC Z-WAVE DOOR/WINDOW SENSOR 6 – White

Designed to blend into any home and any décor, Door / Window Sensor 6 has been engineered to make your home smarter. Intelligence is what makes the connected home a smart one. With Door / Window Sensor 6 your Z-Wave system will have intelligence about the key doors and windows in your home. It’ll know when they’re open. It’ll know when they’re shut. And it’ll know when they’ve been opened and they shouldn’t be.

Door / Window Sensor 6 will provide intelligence to 2 of the core tasks that any home automation system should be responsible for: its security and its control of your home.

 

This Z-Wave Door / Window Sensor 6 is the smallest door and window sensor on the market. Traditional security sensors have always been bulky. They’ve been stuck onto doors and windows, and they’ve stuck out over 1 inch. There’s no nice way to say it: they’ve been ugly. Door / Window Sensor 6 changes all that.

More than 50% thinner than its competition, Door / Window Sensor 6 marries form with function. It offers the same, necessary functionality that you need from a security device but it packages it all within a beautifully designed device that is only 9mm deep and 72mm along the edge. It’s what we consider to be subtle security.

 

 

 

Details
Out Of Stock

AEOTEC Z-WAVE DOOR/WINDOW SENSOR GEN5

This Z-Wave Door & Window Sensor has been designed taking inspiration from the humble thermostat. Like a thermostat, we’ve designed it to find things out, to understand things about your home, and to then use that information to make your home more comfortable, to make your life easier.

The Door & Window Sensor finds out something very simple – whether a door or a window, or in fact any object in your home, is open or closed. But there’s power in simplicity. Power that allows you to inform the rest of your Z-Wave network about your selected doors and windows. Like a thermostat lets your heating and cooling systems know what they should do next, Aeotec’s Z-Wave Door & Window Sensor does the same. Perhaps an open door means that your lights should turn on and welcome you home. Perhaps an open window means that an alarm should be triggered. Whatever it means to your home, with door and window sensors installed, your Z-Wave network will have both the power and the intelligence to do it.

 

 

Add to cart

HOMESYS Z-WAVE MOTION SENSOR

The HomeSYS Z-Wave Motion Sensor is a sleek and stylish motion sensor that can be integrated with your smart devices in your home to ensure full home automation, security and peace of mind.

With an in-built motion and light sensor, a detection range of 7 metres, and a viewing angle of 110°, makes monitoring seamless across daylight and night-time.

 

Features:

  • Motion detection
  • Measures light sensitivity
  • Compatible with 300 Series and 500 Series
  • Easy installation on any wall or surface

 

 

Add to cart

HOMESYS Z-WAVE FLOOD SENSOR

The HomeSYS Z-Wave Flood Sensor is a sensor alarm alerting you to water-rising in a room. How often have you started running the bath, or filling the kitchen sink to do the dishes and then been called to another room, only to return when the bath has almost flowed over the side? Sooner or later, you’re going to forget completely and all those “near misses” will turn into a big disaster.

In addition to flood-proofing your home’s internal wet areas like bathroom and laundry, the HomeSYS Z-Wave Flood Sensor is perfect for residents living in flood prone areas.

Add to cart

HOMESYS Z-WAVE DOOR/WINDOW SENSOR

The HomeSYS Z-Wave Door/Window Sensor is a security alarm installed to activate when a door or window is opened unexpectedly, by sending you an alert to your phone. It can also be installed on your drawers, for added security over your valuables.

Controlled from your smartphone and tablet app, in addition to giving you peace of mind over your security, the Z-Wave Door and Window Sensor has the option to dial into the sensor while you’re out to check whether you’ve closed it.

 

Features:

  • Easy to install with either screws or adhesive stickers
  • Compatible with 300 series and 500 series